Vibrocont SHM-300

Vibration level limit switch for liquids up to 150°C

  • Different process connections for hyginic applications
  • Up to 40 bar process pressure
  • CIP/SIP capable

 

Categories: , ,

Description

Vibrocont SHM-300 is a point level switch for liquids. The Vibrocont SHM-300 is especially designed for food & beverage applications where hygienic requirements are requested. The Vibrocont SHM-300 is used for overfill prevention or pump dry-run protection preferably in storage tanks, mixing vessels and pipes.

Compact:
– Smallest vibronic sensor
Safe:
– Continuous self-monitoring
– Reliable switching independent of media properties
Easy:
– No calibration or adjustment
– Plug & play

Field of application

Point level switch in compact hygienic design with stainless steel housing for the food industry.

Process connections: Threads, M24 process adapter, DIN11851, Tri-clamp, flush mount
Temperature: -40 to +150°C (-40 to +302°F)
Pressure: -1 to +40bar (-14.5 to 580psi)
Surface roughness: 0.76µm or 1.5µm
Approvals: WHG overfill prevention and leakage detection, EHEDG, 3-A, FDA, CSA C/US, 3.1 material certificate, final inspection report

Druck_bis_40 Prozesstemperatur_150 CIP_SIP WHG_Zulassung Bauform_kompakt EHEDG
DC-PNP-variant
Supply voltage 10 V…30 V DC, 3-wire
Switching capacity 200mA
Power consumption ≤ 15mA
Plug Plug M12
Valve connector
AC/DC-variant
Supply voltage 20 V…253 V AC/DC, 2-wire
Switching capacity 250mA
Power consumption ≤ 3,8mA (at the moment of switch-off < 1mA for 100ms)
Plug Valve connector
Output gerneral
Switching time approx. 0.5 s when covering
approx. 1s when becoming free
Hysteresis max. 3mm
Process connections thread ISO 228 G½”
thread ISO 228 G¾” for flush installation in weld-in adapter
thread ISO 228 G1″ for flush installation in weld-in adapter
thread ASME MNPT ½”
thread ASME MNPT ¾”
thread ASME MNPT 1″
thread M24x1,5 for flush installation in weld-in adapter or process adapter
DIN11851 DN25 PN40 (Milk pipe)
DIN11851 DN32 PN40 (Milk pipe)
DIN11851 DN40 PN40 (Milk pipe)
Tri-Clamp ISO2852 DN25-38 (1″…1½”)
Tri-Clamp ISO2852 DN40-51 (2″)
RD52, Tuning fork can be aligned
Conditions of use
Mounting position Any
Switching point 13mm with vertical installation (Water +25°C / +1bar)
10,5mm with horizontal installation (Water +25°C / +1bar)
Pipe extension 103mm
Surface roughness Ra ≤ 1,5µm, EHEDG
Ra ≤ 0,76µm, EHEDG, 3-A
Ambient temperature -40°C…+70°C
Medium temperature -40°C…+150°C
Operating pressure -1bar … +40bar
Storage temperature -40°C…+85°C
Climate class DIN EN 60068-2-38/IEC 68-2-38
exam Z/AD
Medium density > 0,7 g/cm³
> 0,5 g/cm³
Medium viscosity 1mPas … 10000mPas
Dynamic viscosity
Protection class IP65/67 (with plug variant M12)
IP65 (with valve plug variant)
Approvals
WHG Z-65.11-531
Leak detection system Z-65.40-532
3-A, EHEDG depending on the configuration

Documentation german

User manual
Datasheet

Documentation english

User manual
Datasheet

Product configurator