Thermocont® TU4S

Delivery Time: not specified

Universal temperature transmitter / temperature switch for general industrial applications

  • Compact design
  • integrated 2-wire electronic 4…20mA
  • Hart protocol programming

 

Description

Suitable for general applications in

  1. Machinery and plant engineering
  2. Air-conditioning and refrigeration plant engineering
  3. Hydraulic and pneumatic systems
  4. Process industry
  5. Environmental technology

The device is an electronic temperature transmitter / temperature switch for monitoring, control and continuous measurement of temperatures.

A high variety of versions of process connections and electronic types allows the use for a wide range of applications, also for demanding measuring requirements.

Due to its high accuracy and the digital adjustability by HART®, RS485 Modbus®-RTU or IO-Link® the device can be suited to a wide variety of applications.

The optional drift monitoring and redundancy function increases the process safety. At exceedance of the set drift limit a signal will be generated immediately and thus, the product quality will be improved significantly.

Due to the use of two redundantly working sensors, which are mutually monitored, the calibration intervals can be increased und thus calibrations can be saved.

The pressure switch with front-flush O-ring gasket has been specifically designed for the measurement of viscous, paste-like, adhesive, crystallizing, particle-laden and contaminated media.

The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration stress or aggressive media.

A captive laser marking of the type label ensures the identifiability throughout the entire lifetime of the device.

Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.

A LABS- resp. silicone-free version, a factory calibration with calibration certificate and a customer specific configuration resp. preset is also optionally available like a material test certificate EN10204 3.1 or a factory certifications for drink water suitability.

Customer specific special versions can be realized short-term on request, e.g. special designs for the process connection or other process materials.

Prozesstemperatur_200_en Genauigkeit_0_1 Ansprechzeit Schutzart_IP69K_en Bauform_klein
Measuring range
Nominal temperature -50°C…+200°C
Output type A – Current 4…20mA HART®
Analogue output 3,9mA…20,5mA
≥ 3,8mA
≤ 22mA
dI ≤ 1µA
Time behavior T90 ≤ 8ms
ton ≤ 0,2s
Interface HART®-compliant (7.0)
1200 Bit/s
Output type V – RS485 Modbus®-RTU
Interface RS485, bidirectional
Modbus®-RTU
9600 Baud (4800…38400 Baud)
Time behavior T90 ≤ 2ms
ton ≤ 0,1s
Output type L – IO-Link®
Interface IO-Link® V1.1
Com2 (38400 Baud)
Analogue output 0…20mA 0…20,5mA
≤ 0,05mA
≤ 22mA
dI ≤ 1µA
Analogue output 4…20mA 3,8…20,5mA
≥ 3,6mA
≤ 22mA
dI ≤ 1µA
Switch output 2x PP (Push-Pull), switch to +L/-L
Output Uout ≤ 0,2V, ≥ Us – 2V
Iout = 0…200mA
(current limited ≤ 450mA, short circuit protected)
Time behavior T90 ≤ 2ms
ton ≤ 0,1s
Auxiliary power
Supply voltage Typ A: 9…35 V DC
Typ V: 6…35 V DC
Typ L: 9…35 V DC (without IO-Link®)
Typ L: 18…30 V DC (with IO-Link®)
Measuring accuracy
Characteristic deviation ≤ ±(0,25K + 0,002 * [t])
Long term drift ≤ ±0,1K/year
Temperature deviation ≤ ±0,2K
Process conditions
Process temperature Standard: -50°C…+100°C
Extended: -50°C…+200°C
Process pressure ≤ 100 bar
Environmental conditions
Environmental temperature -40°C…+100°C
Protection level IP69K/IP67 (EN/IEC 60529)
MTTF 463 years

Documentation german

Datasheet

Documentation english

Datasheet

Product configurator