Rod probe SBS
Conductive rod with plastic thread
Up to 5 electrodes possible, electrical connection via cable
- Sensor head with sealed cable connection
- Extreme thight and rugged construction
- Up to 5 measuring points
The bar probe SBS is related to the evaluators (eg, SRA-100-U0) is used for level detection and level control in conductive liquids. Depending on the number of bars and evaluation devices used, different measurement tasks such as Overflow, dry run, two-step control, moisture detection, etc. are realized.
Depending on model selected can include the container wall as a mass, to be implemented to 5 switch points. The ground connection erflogt either directly to the container or conducting a probe rod.
Type in the SBS is the connecting cable already connected and encapsulated in the probe head. Through this encapsulation, the probe is outside of the container completely submersible.
|Process pressure max.||10bar|
|Protection class||IP65 EN/IEC 60529|
|Steel 1.4404 (AISI316L)
Steel 1.4571 (AISI316Ti)
|Elektrode trod isolation
|Cable screw||Housing PA