Sonicont USG2

Delivery Time: not specified

Ultrasonic fill level sensor for liquids and solid materialseven from hazardous areas – separate version

  • Easy to install
  • Logger for up to 500’000 logs
  • High reach

 

Description

With the Sonicont USF2 and USG2 provides ACS-CONTROL-SYSTEM GmbH an ultrasonic level transmitter remote version for non-contact level measurement of fluids, pastes and coarse bulk materials before. By long life, easy installation and less maintenance, the ultrasonic measuring system is a proven and cost-effective solution.

Combined with up to 4 freely adjustable switching points and suitable for measuring ranges up to 8m in liquids and up to 3.5 m in bulk materials (on request up to 25m in liquids and up to 12m in solids), this sensor can be used for various measuring tasks for volume linear display in all container types – and with an accuracy of 0.2% and ≤ 2 mm. In addition, the analog output 0 (4) … 20 mA and 0 .. 10V is switchable. The modern transmitter has extensive diagnostic functions for system analysis and still allows easy setup and operation by clear menu guidance.

Besides level measurements the Sonicont USG2 and USF2 is able for measurement of flow rates and currents. The mathematical formulas are already stored in the device. The sensor Sonicont USG2 can be installed up to 300m from the transmitter Sonicont USF2 and has IP65/IP68 protection. The 2 „TFT color display of the Sonicont USF2 provides an excellent representation of the measured values and easy readability. Intelligent data management enables the Sonicont USF2 to record measured values through the Bluetooth® interface and a built-in data logger function.

 

Function
For measurements in liquids and solids non-contact level measurement with ultrasound is a proven and cost-effective method. The lack of contact with the medium ensures a long service life and thus a permanent and reliable measurement.

Selbstreinigungseffekt_en beruehrungslose_Messung Schuettgueter_Fluessigkeiten Messbereich_25_m Ex_Zulassung
Versorgungsspannung Versorgt durch Messumformer Sonicont USF2
Ausgang
Distanz Signal Analoges Spannungs-/Pulssignal
Temperatur Signal Analoges Spannungssignal
Messbereich Flüssigkeiten
USG2 020 ≤ 2m
USG2 050 ≤ 5m
USG2 080 ≤ 8m
USG2 150 ≤ 15m
USG2 250 ≤ 25m
Prozessbedingungen
Prozesstemperatur -40°C…+85°C
Prozessdruck -0,3 bar … 2 bar
Werkstoffe
Sensor
(prozessberührend)
PVDF
Prozessanschluss
(prozessberührend)
PVDF (bei Messbereich 020/050/080/150)
PVDF / PBT Valox (bei Messbereich 250)
Sensorrückseite (Verguss) PE
Anschlusskabel TPE-U
Umgebungsbedingungen
Umgebungstemperatur -40°C…+85°C
Schutzart IP65/IP68 (bei Elektrischer Anschluss – Typ B)
IP67 (bei Elektrischer Anschluss – Typ S)
Klimaklasse 4K4H (EN/IEC 60721-3-4)
Stoßfestigkeit 15g [11ms] (EN/IEC 60068-2-27)
Schwingungsfestigkeit 4g [10…2000Hz] (EN/IEC 60068-2-6)
EM – Verträglichkeit Betriebsmittel Klasse B / Industriebereich (EN/IEC 61326)
Gewicht Sensor 0,5kg (bei USG2 020/050)
0,6kg (bei USG2 080)
0,7kg (bei USG2 150)
0,9kg (bei USG2 250)

Dokumentation deutsch

Bedienungsanleitung
Datenblatt

Dokumentation englisch

Bedienungsanleitung
Datenblatt

Product configurator