Rope probe SST

Hang-in electrodes with plastic thread, up to 5 electrodes possible

  • Lenght of rope can be easily adjusted by enduser
  • Up to 15m rope
  • Up to 7 measuring points

 

Categories: , ,

Description

The cable SST probes are related to the evaluators (eg, SRA-100-U0) is used for level detection and level control in conductive liquids.

Depending on the number of cables used and the evaluation units, different measurement tasks such as Overflow, dry run, two-step control, moisture detection, etc. are realized.

Depending on the selected version, can include the container wall as a mass, to be implemented to 7 switch points. The ground connection erflogt either directly to the conductive container or through a cable probe.

In the probe head, an additional module (diode module LBM) for permanent circuit monitoring to be installed.

In the case of a line break between the electrode probe and an appropriate evaluation, the evaluation issue an alert.

Messpunkte_bis_7 Korresionsbestaendig Seillaenge_15_m Prozesstemperatur_120
Process pressure max. pressureless operation
Medium temperature -10°C…+120°C
Material connection housing POM
PP
PTFE
Material process conncetion POM
PP
PTFE
Material probe rope Steel 1.4404 (AISI316L)
Steel 1.4571 (AISI316TI)
Isolation probe rope PTFE
Gaskets NBR (Medium contact)
FPM

Documentation german

User manual
Datasheet

Documentation english

User manual
Datasheet

Product configurator