PTI

Immersion pocket – resistance thermometer Pt100 with spring-loaded measuring insert

  • Best heat transfer through spring-loaded measuring insert
  • Sensor and process connection made entirely of V4A
  • Can be combined with a transmitter in the connection head

 

Description

ACS Pt100 probes have a high accuracy and reproducibility are extremely reliable. The sensing elements are embedded in the protective tube with magnesium oxide powder and are sealed hermisch. Thus, a good heat transfer and vibration protection is achieved.

Standard measuring temperatures are -70 ° C. .. +300 ° C; High temperature versions +500 ° C / +600 ° C, low-temperature versions, special materials, special process connections and OEM versions are also available. The given measuring temperature refers to an average temperature at the probe tip.

With cable versions, for example PTS / PTK and Pt100 sensors with connection head, possibly with integrated head transmitter, the respective maximum temperature of the cable, heads, etc. with on-site isolation, use of Pt100 must be considerated.

The measurement speed of the individual Pt100 sensor is highly dependent on operating conditions, the measured medium and the physical dimensions.

The immersion depth should not be less than 50 mm. Please clarify always shorter probe lengths with the ACS staff.

CIP_SIP 4_20mA_2_PNP Ansprechzeit V4A Saeurebestaendig
Measuring element Platinum resistance element Pt100 / Pt1000
Temperature ranges
(at the measuring tip)
-70°C…+300°C
-70°C…+500°C (on request)
-70°C…+600°C (on request)
low-temperature version (on request)
Tolerace class AA, A, B – according to IEC 60751
Signal type 1 x Pt100: in 2-, 3- and 4-wire connection
2 x Pt100: in 2 x 2- or 2 x 3-wire connection
3 x Pt100: in 3 x 2-wire connection
free skinner for self-installation of a head transmitter
head transmitter, 4…20 mA/ 0…10 V output, standard, Ex,
Profibus; others on request
Connection type terminal compartment in Alu-, plastic- or stainless steel housing
fix connection cable – PTFE shielded, silicone, PVC, glass silk with steel mesh
Lemo-plug system, M12 plug system
others on request
Materials
(process side)
protective tubes made of seamless stainless steel: 1.4571(AISI 316Ti)
flanges, process connections: 1.4571 (AISI 316 Ti)
special materials on request
Materials
(connection side)
housing:aluminium, CrNi-steel, PP-polypropylene, POM-polyoxymethylene
cable material see „connection type“

Documentation german

User manual
Datasheet
Wiring diagram

Documentation english

User manual
Datasheet

Product configurator